Tuesday, December 21, 2021

Swiftec 2.0.4.0 Full Electric and Hybrid READY! BMS/BPCM Recovery Module!

 

Swiftec Software v2.0.4.0 is the last release in 2021! Lets see what Santa brings this time?

In 2021, we finish the same way as we started. In big!… We prepared a great release for you to enjoy and you can not miss it!

Swiftec Software continues to innovate, it is going to this new Era of hybrid and electric vehicles and it is adapting to the future. With this update we are proudly present support for control units which are used to manage that kind of vehicles. Thanks to the cooperation with VF2 Flasher we were able to create a gift for our customers! Exclusive support for the range of Full Electric and Hybrid control modules: Fiat and Porsche with Bosch BPCM, PSA with BOSCH HV17.4.1, SMART with BOSCH BMS and VAG with BOSCH INVCON 2.x!

What is the “cherry” of the update is our new module: the BMS (Battery Management System) / BPCM ( Battery pack control module) Recovery Module!

BMS / BPCM is the unit responsible to manage critical parameters in batteries from hybrid or electric vehicles, such as voltage, temperature and current, for example. When this unit detects some anomaly, it triggers a safe mode. Even when the battery is replaced, this unit keeps raising the problem. To escape those problems, BMS/BPCM Recovery Module will allow the costumers to restore those units without replacing them for new ones.

But is not only that... Again and again we improve the Swiftec Software coverage so you can have the best and the fastest tuning editor in the market and save a lot of time and trouble, solving problems with a click! This release once more we crossed the border of 300 new and updated solutions.

You will be able to find 107 new solutions and 194 fixes, split among the Swiftec Software modules, like ADBlue Removal, Burbles Activation, DPF Removal 2.0, DTC Removal, EGR Removal or Lambda/O2 Removal, for example. Swiftec solutions had a big improvement and boost this release to cover new firmware and more variations of the existing ones.

Forget The Limits! Thank you for all of your support!

 

Here is the complete list for this update:

Tuesday, November 9, 2021

Swiftec 2.0.3.0 - New update, new module, new solutions!

 

Hello!

This release comes with a lot of news. As we continue to evolve with the automotive market and following the requests of our customers, we prepared a new module named Active Grille Shutter (AGS) Removal and a nice pack of solutions for our community.

The AGS Removal module is a new type of automatic solution added to the Swiftec Software that allows the user to take care of malfunctions created by this system. As the Active Grille Shutter performs an automatic opening or closing of the shutters, based in real-time needs. Some times the actuator from this mecatronic system fails, and using the one-click Swiftec AGS Removal module, you will be able to solve the problem in a few seconds.

In this update there are many new solutions – 129 new solutions and 172 updates! For example, for Burbles Activation, DTC Removal, Hot Start Fix, Lambda/O2 Removal and Speed Limiter Removal modules! And don’t forget… We also updated a big number of solutions, provider better and more reliable firmware modifications.

Everyone knows that Swiftec Software is the “Click & Go” of the tuning market. Our automatic solutions allow our users to get a great solution to their problems of the daily job.

Join our community and enjoy the best solutions and support in the world!

Please check carefully the list below, so you do not skip any of those unique solutions and so you can make your customers completely satisfied with Swiftec help!

 

Thursday, September 9, 2021

Swiftec 2.0.2.0 Lots of new and updated solutions!

 

Hello!

As always, Swiftec Software is constantly improving, looking in future and preparing the best features for its community!

Proudly, we present you one more release full of new solutions for a wide list of ECUs, bringing also new vehicles to our coverage, and increasing the quality of our previous solutions by implementing a lot of updates. This time our support and development team prepared 297 solutions for our community!

Everyone in this market knows that DTC removal is one of the hardest jobs to make with perfection. And, in this area, we are the best! Our DTC Removal Module has a great coverage and now it was improved even more. We added new vehicle brands, new ECUs and a lot of new firmware. This will make your job much easier.

And by talking in turning a hard job in a more simple one... Everyone knows that Swiftec Software is the “Click & Go” of the tuning market. Our automatic solutions, split among our modules, allow our users to get a great solution to their problems of the daily job.

For that we have modules like DPF Removal, Hot Start Fix, Speed Limiter Removal, ADBlue Removal, Burbles Activation, Torque Monitoring Disable or Readiness Calibration, for example, that keep getting updates and new options, covering more and more vehicles from different types and extending the coverage to various brands and models of ECUs.

Join our community and enjoy the best solutions and support in the world!

If there is something that you would like to have covered by Swiftec Software or updated in the future, don't worry. We will continue to increase our list of solutions and their effectiveness in the next updates!

Here is the complete list for this update:

Monday, July 19, 2021

Swiftec 2.0.0.0 Ultimate Upgrade!

 

Hello!

It has been a few months since the last update of Swiftec Software, but we have been working hard all this time to prepare something really cool for our users.

After a lot of work, we can present you a Swiftec Software version that you will be able to use with with a much higher performance, reliability and security in Windows 10! And also, if you are always looking ahead to the future, you can use it in Windows 11 (build 22000)! You will be amazed with the performance improvement of this version! We made some tests and, in some cases, it is up to 2250% faster! Swiftec Software processes a lot of complex functionalities and data, so sometimes it took some minutes to process some modules in one time... But not now! Now it takes just a few seconds! It is SUPER FAST!

During this time we also made a remarkable growth in our solutions. This update brings a new record. It counts with 550 solutions, split by many modules, vehicle brands and ECUs. 286 of those are new solutions. We prepared the best solutions for you by improving the coverage of Swiftec Software solutions, as long of its quality and supported firmware.

Once more, DTC Module is in big shape: 96 solutions, 11 new and 85 fixes. But it is closely followed by Lambda/O2 Removal with 86 solutions and Burbles Activation with 67 solutions. This is the podium of this release. These modules have a lot of news for many vehicles like, for example, BMW Motorrad, Audi, Aston Martin, Cadillac, Ferrari, Ford, Geely, KIA, KTM, Lexus, MCLAREN, Mercedes, Porsche, Volkswagen, ...

But don’t forget about the other Modules like Secondary Air Pump Removal, Exhaust Flap Removal, EVAP Removal, GPF/OPF Removal, Burbles Activation, Popcorn Activation, Cold Start Noise Reduction, Kickdown Deactivation, Readiness Calibration, Sport Displays Calibration, Hot Start Fix, Immo Removal, Boost Sensor Calibration, TVA Removal, Torque Monitoring Disable, Flaps / Swirl Removal, MAF Removal Module, StartStop Disable, DTC Removal, ADBlue Removal, DPF Removal 2.0, EGR Removal, Speed Limiter Removal or Lambda/O2 Removal. All of them bring a very big variety of new solutions and fixes.

At the start of this month, we created the official Swiftec group in Facebook: Swiftec Community! We want to create a true community, a place where you can ask questions or help other members, check news or simply share your experience in this area.

You can check the Swiftec Community group by clicking here.

Here is a Big Thank You to all of our customers that were immediately available to test the beta version and that helped us prepare and fix this update. Now we can say even with more certainty that Swiftec is a software made by tuners, with tuners and for tuners.

Here is the complete list for this update:

Tuesday, February 23, 2021

Swiftec 1.9.9.8 - Many new and updated solutions waiting for you!

Swiftec Software continues to improve its coverage, support and quality, providing more and better solutions to our customers.

This release is another big one, counting 294 new and updated solutions!

From those 294, there are 84 new solutions! You can find them in many different modules, like Lambda/O2 Removal, Burbles Activation, ADBlue Removal, EGR Removal, Hot Start Fix, Speed Limiter Removal, DPF Removal 2.0, …

But do not forget about the updates ones. We made a big improvement on the coverage of our solutions, so that our software can support more and more firmwares. For example, DTC Removal has 45 updates and ADBlue Removal has 43! There are other modules with many updates also, like DPF Removal 2.0 or EGR Removal. All together it goes up to 210 updated solutions, applied in many different vehicle brands / groups and ECUs.

Swiftec Software also go some updates, mainly related to the information messages presented to the users. This was made to give the users a better and more intuitive experience when they are working with our software.

Following the application update, we also updated our ticket system, so it becomes easier to create a ticket based on the output of Swiftec Software. All of this will allow the user to make more precise tickets, having a better and fast reply to them.

Join our community and enjoy the best solutions and support in the world!

You must use the best ECU editing software if you want to be a professional in the chip-tuning this market! Use SWIFTEC SOFTWARE!

Made by tuners for tuners! Forget The Limits!

As usually, you can check our complete list of changes below.

Wednesday, January 13, 2021

Swiftec 1.9.9.7 - New Year Release! New Record! 300+ New and Updated solutions!

 

This year we wanted to start big! Swiftec forgot the limits and pushed the boundaries of solutions in a release! So we were able to establish a new record. Ladies and Gentlemen, in this release we launched 301 solutions, 76 of with are new ones, split by different modules and for many vehicle brands.

This time, one of the most improved modules was Hot Start Fix, with 19 new solutions. Now it has support for more a few Bosch EDC17 ECUs used in vehicles like Alfa Romeo, BMW, Chevrolet, Fiat, Ford and VAG.

Other modules coverage and support have been improved a lot also, like DTC Removal, DPF Removal 2.0, Lambda/O2 Removal, Burbles Activation and EGR Removal modules. These 5 modules updates go up to 217 solutions. From those 38 are new solutions for a wide range of vehicles and engine control units. But we can not forget the other solutions that were updated. These ones are now much better and precise, making an even better job to solve many problems.

In a vast variety of solutions, we added also some solutions for vehicle brands like Bentley, Cadillac, Pellenc and Takeuchi.

Again, we continued to improve the coverage, support and quality of our product, providing the best and even more solutions to our customers, helping them on their daily jobs just by making a few clicks.

If you want to be a professional in the chip-tuning business area, you must use the best ECU editing software available on the market! SWIFTEC SOFTWARE!

Join our community and enjoy the best solutions and support in the world!

Here is the complete list for this release: