New Swiftec out, we would like in short describe most important
things introduced by new version.Newest addition to Swiftec is Launch
Control module, it will enable any costumer to setup this feature in a
big range of cars. We started now with EDC15V and EDC15P, but soon more
ecutypes will be added! Many costumers requested us for interpolation
modification possibilityand we added it ! DPF OFF emulation mode has
been improved a lot! More features and improvements have been added,
costumers can check below, but before... As usually we would like to
thank all our customers who helped us with preparation this version, but
especially we would like thank Dean, Doyen, Dragos, Stefan and Vadim!
New Features
Launch Control module: New module introduced!
Launch Control module: Support for VAG with Bosch EDC15P and EDC15V has been added!
Automatical Map Recognition: Support for Citroen and Peugeot with Siemens SID807 has been added!
Automatical Map Recognition: Support for Hyundai with Siemens SIM2K has been added!
Automatical Map Recognition: Support for Volvo with some variations of Siemens SID807 has been added!
Automatical Map Recognition: Speed Limiter recognition for Land Rover Range Rover TDV6/TDV8 with Siemens has been added!
Automatical Map Recognition: Support for Mercedes with EDC17C43 has been added!
Automatical Map Recognition: Support for VAG with EDC17_C54 has been added!
Automatical Map Recognition: Support for VW Transporter with EDC16U1 has been added!
Automatical Map Recognition: More file types for BMW with EDC16C35 and EDC17_CP09 has been added!
Automatical Map Recognition: More file types for Hyundai and KIA with EDC16C39 has been added!
Automatical Map Recognition: More file types for Mercedes with Delphi CRD2.x has been added!
Automatical Map Recognition: More file types for Mercedes with EDC16C31 and EDC16CP36 has been added!
Automatical Map Recognition: More file types for Opel with EDC15M and EDC16C9 has been added!
Automatical Map Recognition: More file types for Opel with EDC17_C18 and EDC17_C19 has been added!
Automatical Map Recognition: More file types for Renault with EDC16CP33 has been added!
Automatical Map Recognition: More file types for Porsche with ME7.8 has been added!
Automatical Map Recognition: More file types for VAG with EDC16CP34 has been added!
DPF Removal 2.0 module: Support for Hyundai and KIA with EDC16C39 has been added!
DPF Removal 2.0 module: Support for Jaguar with EDC17_CP11 has been added!
DPF Removal 2.0 module: Support for Land Rover with EDC17_CP11 has been added!
DPF Removal 2.0 module: Support for Mitsubishi with EDC17CP15 has been added!
DPF Removal 2.0 module: More variations of BMW with EDC17_C06 and EDC17_CP09 has been added!
DPF Removal 2.0 module: More variations of Mercedes with EDC17CP10 has been added!
DPF Removal 2.0 module: More variations of Toyota with EDC17_CP07 has been added!
DPF Removal 2.0 module: More variations of VAG with EDC17_CP04 and EDC17_CP14 has been added!
DPF Removal 1.0 module: Hard DPF Reset for Mazda with Denso has been added!
Lambda/O2 Removal module: Support for BMW with Siemens MSV70 has been added!
Lambda/O2 Removal module: More variations of Citroen and Peugeot with MED17 has been added!
Lambda/O2 Removal module: More variations of VAG with ME7.1.1 has been added!
Lambda/O2 Removal module: More variations of VAG with MED17.1 has been added!
Automatical Map Detection: Siemens SIM2K has been added!
ECU Detection: Mitsubishi and Subaru with Denso hardware and software number detection has been added!
ECU Detection: Opel with Denso software number detection has been added!
MAP Mode: Interpolation modification way has been added by absolute or percentage values
Project DB: Mouse right click menu with columns control possibility has been added!
Project DB: Different additional fields as VIN, Model Year, HP, etc has been added!
Project DB: Possibility to filter by few words with separator '+'
Checksum Detection: '16/8Bits based' automatic recognition for VW with Bosch DDE has been added!
Checksum Detection: 'Bosch EDC7' automatic recognition has been added!
Checksum Detection: 'Bosch EDC16/EDC16+' automatic recognition for files with size range from 248KB to 2MB has been added!
Checksum Detection: 'Bosch Opel ME7.6.x/ME7.9.x' automatic recognition for 832KB ME7.6.2 files has been added!
Checksum Detection: 'Bosch Smart E2' automatic recognition has been added!
Checksum Detection: 'Bosch Smart E3' automatic recognition has been added!
Checksum Detection: 'Fiat IAW 4SF/4DF/5SF' automatic recognition for 576KB IAW 5SF files has been added!
Checksum Detection: 'IAW 4AF/59F/5AF Euro2-4' automatic recognition 320KB IAW 4AF/59F/5AF files has been added!
Checksum Detection: 'Siemens F200/F400' automatic recognition has been added!
Checksum Detection: 'Siemens SID Ford/Peugeot/Volvo' automatic recognition for 4MB SID807 files has been added!
Improvements
DPF Removal 2.0 module: Iveco with EDC16C39 much more stable working now
DPF Removal 2.0 module: Mercedes with EDC16C31, EDC16C32, EDC16CP31, EDC16CP36 has been a lot improved!
DPF Removal 2.0 module: Emulation solutions has been a lot improved!
ECU Detection: Bosch ECU type detection has been improved
ECU Detection: Problem with detection Hyundai with Siemens SIM2K as Bosch has been fixed!
2D Mode: Percentage changes now much more accuracy
MAP Mode: Show Original/Modified values function applied to Axises also
Project DB: Cars, Models, Engines list has been updated
Checksum Detection: 'Bosch EDC16' and 'Bosch EDC16+' automatic recognition has been improved!
Bugfixes
OBD Reading Protection: Checkbox was not active all the time
2D Mode: Forward scrolling by clicking on scroll bar could not be done in 16/32BIT with small X-Zoom value
MAP Mode: Min and Max limits for Axises now applied with factor and offset
MAP Mode: Problem with Change by Edit by not integers in 32BIT FLOAT has beed fixed
MAP Mode: Y Axis could not be edited correctly with 8 BIT mode
New Features Launch Control module: New module introduced! Launch Control module: Support for VAG with Bosch EDC15P and EDC15V has been added! Automatical Map Recognition: Support for Citroen and Peugeot with Siemens SID807 has been added! Automatical Map Recognition: Support for Hyundai with Siemens SIM2K has been added! Automatical Map Recognition: Support for Volvo with some variations of Siemens SID807 has been added! Automatical Map Recognition: Speed Limiter recognition for Land Rover Range Rover TDV6/TDV8 with Siemens has been added! Automatical Map Recognition: Support for Mercedes with EDC17C43 has been added! Automatical Map Recognition: Support for VAG with EDC17_C54 has been added! Automatical Map Recognition: Support for VW Transporter with EDC16U1 has been added! Automatical Map Recognition: More file types for BMW with EDC16C35 and EDC17_CP09 has been added! Automatical Map Recognition: More file types for Hyundai and KIA with EDC16C39 has been added! Automatical Map Recognition: More file types for Mercedes with Delphi CRD2.x has been added! Automatical Map Recognition: More file types for Mercedes with EDC16C31 and EDC16CP36 has been added! Automatical Map Recognition: More file types for Opel with EDC15M and EDC16C9 has been added! Automatical Map Recognition: More file types for Opel with EDC17_C18 and EDC17_C19 has been added! Automatical Map Recognition: More file types for Renault with EDC16CP33 has been added! Automatical Map Recognition: More file types for Porsche with ME7.8 has been added! Automatical Map Recognition: More file types for VAG with EDC16CP34 has been added! DPF Removal 2.0 module: Support for Hyundai and KIA with EDC16C39 has been added! DPF Removal 2.0 module: Support for Jaguar with EDC17_CP11 has been added! DPF Removal 2.0 module: Support for Land Rover with EDC17_CP11 has been added! DPF Removal 2.0 module: Support for Mitsubishi with EDC17CP15 has been added! DPF Removal 2.0 module: More variations of BMW with EDC17_C06 and EDC17_CP09 has been added! DPF Removal 2.0 module: More variations of Mercedes with EDC17CP10 has been added! DPF Removal 2.0 module: More variations of Toyota with EDC17_CP07 has been added! DPF Removal 2.0 module: More variations of VAG with EDC17_CP04 and EDC17_CP14 has been added! DPF Removal 1.0 module: Hard DPF Reset for Mazda with Denso has been added! Lambda/O2 Removal module: Support for BMW with Siemens MSV70 has been added! Lambda/O2 Removal module: More variations of Citroen and Peugeot with MED17 has been added! Lambda/O2 Removal module: More variations of VAG with ME7.1.1 has been added! Lambda/O2 Removal module: More variations of VAG with MED17.1 has been added! Automatical Map Detection: Siemens SIM2K has been added! ECU Detection: Mitsubishi and Subaru with Denso hardware and software number detection has been added! ECU Detection: Opel with Denso software number detection has been added! MAP Mode: Interpolation modification way has been added by absolute or percentage values Project DB: Mouse right click menu with columns control possibility has been added! Project DB: Different additional fields as VIN, Model Year, HP, etc has been added! Project DB: Possibility to filter by few words with separator '+' Checksum Detection: '16/8Bits based' automatic recognition for VW with Bosch DDE has been added! Checksum Detection: 'Bosch EDC7' automatic recognition has been added! Checksum Detection: 'Bosch EDC16/EDC16+' automatic recognition for files with size range from 248KB to 2MB has been added! Checksum Detection: 'Bosch Opel ME7.6.x/ME7.9.x' automatic recognition for 832KB ME7.6.2 files has been added! Checksum Detection: 'Bosch Smart E2' automatic recognition has been added! Checksum Detection: 'Bosch Smart E3' automatic recognition has been added! Checksum Detection: 'Fiat IAW 4SF/4DF/5SF' automatic recognition for 576KB IAW 5SF files has been added! Checksum Detection: 'IAW 4AF/59F/5AF Euro2-4' automatic recognition 320KB IAW 4AF/59F/5AF files has been added! Checksum Detection: 'Siemens F200/F400' automatic recognition has been added! Checksum Detection: 'Siemens SID Ford/Peugeot/Volvo' automatic recognition for 4MB SID807 files has been added! Improvements DPF Removal 2.0 module: Iveco with EDC16C39 much more stable working now DPF Removal 2.0 module: Mercedes with EDC16C31, EDC16C32, EDC16CP31, EDC16CP36 has been a lot improved! DPF Removal 2.0 module: Emulation solutions has been a lot improved! ECU Detection: Bosch ECU type detection has been improved ECU Detection: Problem with detection Hyundai with Siemens SIM2K as Bosch has been fixed! 2D Mode: Percentage changes now much more accuracy MAP Mode: Show Original/Modified values function applied to Axises also Project DB: Cars, Models, Engines list has been updated Checksum Detection: 'Bosch EDC16' and 'Bosch EDC16+' automatic recognition has been improved! Bugfixes OBD Reading Protection: Checkbox was not active all the time 2D Mode: Forward scrolling by clicking on scroll bar could not be done in 16/32BIT with small X-Zoom value MAP Mode: Min and Max limits for Axises now applied with factor and offset MAP Mode: Problem with Change by Edit by not integers in 32BIT FLOAT has beed fixed MAP Mode: Y Axis could not be edited correctly with 8 BIT mode
No comments:
Post a Comment