Swiftec 1.9.4.5 New and unqiue solutions! Caterpillar ADAM is already here!

Again new update and new unique solutions are available also, as always lots of research has been done and as result we now have support by DTC Removal Module for newest Mercedes with Delphi CRD3.E1 ECUs, finally after months of testing we have complete DPF, EGR and DTC solutions for Ford and Jaguar with Delphi MPC555  this are quite old cars but still very requested ones by our costumers and because of them we made this unique possibility in Swiftec, we continue to browse Cummins ECUs world and new solutions for CM850 and CM2350 have been added, another great point of current release is research done on Caterpillar equipped with CAT ADAM ECUs, and we have TVA, DPF and EGR OFF solutions ready for them also! This are only the main things we developed between many other improvements, like SPEED OFF for Polaris with Bosch ME17 or Ford with Visteon EECVI, but full list of solutions can be found as usually below!

Swiftec 1.9.4.4 Never stops! Fresh update! New solutions and wider coverage!

Dear customers, as we promised, 2 weeks were passed and new update is already here! Following  this direction we bring to you our newest solutions as soon as possible and we increase coverage of previous solutions so support requests will be much less as by doing so we are able to prevent it!

Swiftec 1.9.4.3 Never stops! Fresh update! New solutions!

Only a bit more than 2 weeks passed and already new update is ready for our customers! After adding more people to VCPowerTeam we have now possibility to create updates much faster improving this way our costumer service! Please take a look to our complete list, coverage of our modules continue increase to
follow all our customers needs!

Swiftec 1.9.4.2 Extremely big update! As usually following our customers requirements!

Another month passed since last release and we are now ready to present new update for Swiftec, as usually we build it following our customers requirements, and this requirements are really wide! Thanks to them coverage of our automatic modules are growing by giants steps and its allways a pleasure for us to help our customers! Thats why, as we promised, we bring with this update support of DTC, EGR and SPEED OFF modules for VAG with Delphi DCM6.2! Next by popularity requests are solutions for agriculture, industrial and truck vechicles, and as you can see today we made great job adding more of them to our ADBLUE OFF module, for example Scania with Motorola EMS S6, DAF with Motorola CM850, different tractors and much more! Sure, for every tuner is improtant to prevent Torque Monitoring issues and we make our work on this field also! DTC Removal module still be in hard development and new algorithms were introduced, at the same time old ones were improved a lot! Full list of changes you can find below, but take attention, it will take time to read all of news we have there! :)
We would like to thank all of our customers in supporting us, but this time personally Dragos, Pedro and Timur!

Swiftec 1.9.3.7 - Christmas and New Year Update! Get New Exclusive and Unique solutions with Amazing Special Limited XMAS Promotion Program!

Santa almost knocking in our doors and we are also here to bring you next great news about Swiftec!
As you all know already we run Special Limited XMAS Promotion Program ( you can read more about it here: https://vcpowerteam.com/news/company/502/ ), but we want  to extend it for our current customers by offering 30% discount for credits and 50% discount for checksum modules! To be elegible to get it its mandatory to have active subscription and payment must be done till 31st of December 2016!
Second good news, today we released new update for Swiftec, it have big big list of new features and improvements as usually, and as usually we will point most important ones! So, we continue add new solutions for DTC Removal module to make coverage of it so wide as possible, this time we analyzed around 500 firmwares of Siemens SID305 / SID306 and thanks to that since now you can delete DTCs from any Nissan and Renault equipied with it! More and more new tractors get supported by ADBLUE Removal module, some solutions were updated to be sensorless! Furthermore we had researched Marelli MJ9D and now it is possible to remove DPF from vehicles equiped with it, like Fiat or Lancia by DPF Removal module! Speed Limiter Removal module got support for Toyota Denso 2016 MY! And even more important news, we finally got some time to research ECUs from Cummins family and already have success with it, as first step we made Dodge with Cummins CM21xx and now it is possible to remove DPF, EGR or O2 components from vehicle using Swiftec!
As usually we want to thank all of customers who was cooperated with us in preparation of this update, but especially Habib, Jari Les and Yan!
Below you may find complete list of change in this update:

Swiftec 1.9.3.5 New Exclusive ADBlue Removal solutions for Trucks and Tractors with Temic and Bosch ECUs!

Less than a month has passed and VCPowerTeam is back with new GREAT update, ready for our customers! As usual and as you are used to, we prepared new EXCLUSIVE solutions for you, and other lots of improvements! As the total list of updates is very big, same as previous news, we will mark most important items fr om there! First of all, we still increase coverage of Adblue Removal module for Temic ECUs, and with this release we happilly announce its support now, not only Temic PLD, but also Temic PLD2 and Temic ACM / MCM. Current list of supported Trucks / Tractors can be found on dedicated module page, but another good new is that basically every Truck or Tractor equipped with those ECUs can be done by our team with your cooperation - just contact us! Also there's added solutions for different Tractors with Bosch EDC17CV41/44/54! Next important thing, is the update for DTC Removal Module. From now on it supports Mercedes with Delphi CRD3.x, and during the preparation of this update we have analysed and researched above 500 original firmwares from this ECU family to make so good coverage of solution, and so stable work as possible for our customers! We cannot forget about massive update of EGR Removal module wh ere lots of new solutions have been introduced and most of them can be used with EGR actuator disconnected! These were the main points of the update, but complete list of changes are described below!

Swiftec 1.9.3.4 - ADBLUE Removal for MERCEDES TRUCKs, Automatic maps for DSG DQ250 MQB and really much more!

Vacations passed, but work was not stopped here and we were not relaxing at all, now we are happy to announce new really great update for Swiftec software that gives to our customers new and improved solutions! Below you would find big big list of changes made in software modules and it's easy to lost in it, that's why we would like to focus you on most of major things you will get with the update. So, first of all it's ADBLUE Removal module support for Mercedes Truck with Temic PLD EU5 and HOWO with Denso! On DPF Removal module it's AEBI Smidth with Bosch EDC17CP52, FORD with Bosch EDC17_CP05 and FORD with BRAND NEW Bosch EDC17_C70! Another HOT thing - it's support for Automatical map recognition module of John Deere with Phoenix Lxx and hottest DSG DQ250 MQB! Sure we did not forget about another modules and meanwhile there's lots of new and improved solutions for DTC, EGR, O2, SWIRL and TVA Removal modules!
This update could not be done without help of all our customers and we another time send them thanks for great support of us!

Swiftec 1.9.3.2 *NEW* TVA Removal module and much more!

Here's the new update for Swiftec we're still opening new horizonts and much more is yet to come! We allways pursuit to offer our customers the best tool in the world without any limits! Main news of this update, NEW TVA (Throttle valve actuator) Removal Module, you can read about it here but we sure everyone already knows for what its needed, as always module works by one click with Swiftec. Supported car list is not very big at start, but as usualy we will improve it at each release to cover more and more units so do not hesitate to request us solutions for not supported units yet. Next good news, as VAG with SIMOS 18 is supported over OBD by any major flasher on market we prepared Lamba / O2 solution for it, you may find it with this release already! DTC Removal module does not stop also and it gets support for new ECUs, one of example brilliant job done by our RnD department it's support of Opel PSG16! Sure it's not only this that we have prepared for our customers with this update, below you can find another not less amazing developments from VCPowerTeam, ex. rare Kubota with Denso, now it's possible to remove EGR and DPF with Swiftec, also there's important ADBLUE OFF solution for Iveco with Bosch EDC17CV41, lots updated solutions which are sensorless now, support of DTC OFF for Deutz EDC16UC40 and much more!
As always we would like to thank everyone of our customers who helps us and for this update especially Aleksej!

TVA Removal module *NEW*
Support for Mercedes with CRD2 has been added.
    *IMPORTANT* TVA plug must be disconnected!
Support for Mini with EDC16C35 has been added.
    *IMPORTANT* TVA plug must be disconnected!
Support for VAG with EDC17_CP04 has been added.
    *IMPORTANT* TVA plug must be disconnected!
Support for VAG with EDC17_C54 has been added.
    *IMPORTANT* TVA plug must be disconnected!

Swiftec 1.9.3.1 Moving forward - never stops!

Summer almost came but it's not time to relax and VCPowerTeam is always moving forward together with our customers! Swiftec always gets improved and it doesn't depend on time of the year.
Today we proudly release new update! Our Torque Monitoring disable module has really big popularity and it's a big help for a lot of tuners. This release we updated and improved it a lot. StartStop disable function now is avaiable for Mercedes also same as Speed Limiter Removal for old but still very popular ME2.x! For ADBlue and DPF Removal module, following the wishes of customers we added new solutions and also updated old ones, so lots of them are sensorless now! Sure we did not forgot about EGR and Lambda/O2 Removal modules and happy to introduce huge list of new solution for it! There's also one more good news for our customers, it's DTC Removal module we introduced now support of VAG with Simos 10.xx and some Tractors with Bosch EDC7! Below you would find full list of changes of update.
Above all we would like thank all of our customers who helped us a lot to make this release available!

MERCEDES MED17.7.3 - New map file deleloped by our R&D Department!

Thanks to our hard working team in the MAP Department it was possible to create a unique map pack for Mercedes 63AMG!
This map will enable each costumer to work the tuning of this cars with maximum precision possible.
No need to waste time looking for it and creating each one on other softwares Swiftec have it all!
Maps included: